Electromechanical characteristics of etched high-voltage anode foils
| Foil model | Thickness, mm | Parameter meaning | Nominal weight of foil 1 m2, g (±10%) | |||
|---|---|---|---|---|---|---|
| Nominal capacitance UF= 50 V, μF/dm2 at | Tensile strength, kgf/10 mm, not less than | Number of folds, not less than (r = (0.5±0.05) mm) | ||||
| Uf = 400 V | Uf= 520 V | |||||
| АВ1/0,080 | 0.08 | 17.3 | ‒ | 1.5 | 40 | 209.1 |
| АВ2/0,080 | 29.5 | ‒ | 1.5 | 40 | 194.6 | |
| АВ3/0,080 | 35.4 | ‒ | 1.4 | 40 | 188.2 | |
| АВ4/0,080 | 41.1 | ‒ | 1.3 | 35 | 179 | |
| АВ5/0,080 | 49.6 | ‒ | 1.1 | 20 | 166.7 | |
| АВ6/0,080 | 58.7 | ‒ | 1.1 | 20 | 157.5 | |
| АВ1/0,100 | 0.1 | 17.3 | ‒ | 1.7 | 40 | 249.6 |
| АВ2/0,100 | 29.5 | ‒ | 1.7 | 40 | 235.1 | |
| АВ3/0,100 | 35.4 | ‒ | 1.6 | 40 | 228.7 | |
| АВ4/0,100 | 41.1 | ‒ | 1.5 | 35 | 219.5 | |
| АВ5/0,100 | 49.6 | ‒ | 1.4 | 20 | 207.2 | |
| АВ6/0,100 | 58.7 | ‒ | 1.3 | 20 | 198 | |
| АВ7/0,100 | 74 | ‒ | 1.1 | 20 | 186.4 | |
| АВ8/0,105 | 0.105 | ‒ | 62 | 1.6 | 20 | 224.6 |
| АВ6/0,110 | 0.11 | 58.7 | ‒ | 1.4 | 20 | 202.5 |
| АВ7/0,110 | 74 | ‒ | 1.1 | 20 | 229.6 | |
| АВ8/0,110 | 85.3 | 62 | 1.1 | 20 | 239.9 | |
| АВ9/0,110 | ‒ | 72 | 1.6 | 20 | 233.7 | |
| АВ9/0,120 | 0.12 | ‒ | 72 | 1.8 | 40 | 242.8 |
| АВ10/0,125 | 0.125 | ‒ | 82 | 1.8 | 40 | 243 |
Specific capacitance of high-voltage molded foils as a function of molding voltage
| Uf, V | Nominal individual capacity, μF/dm2 | ||
|---|---|---|---|
| АВ1/0,080-3 АВ1/0,100-3 | АВ2/0,080-3 АВ2/0,100-3 | АВ3/0,080-3 АВ3/0,100-3 |
|
| 200 | 30.4 | 54.8 | 80.5 |
| 210 | 28.9 | 52.8 | 75.5 |
| 220 | 27.6 | 50.9 | 71 |
| 230 | 26.4 | 49 | 67 |
| 240 | 25.3 | 47.3 | 63.3 |
| 250 | 24.3 | 45.6 | 60 |
| 260 | 23.4 | 43.9 | 57 |
| 270 | 22.5 | 42.4 | 54.2 |
| 280 | 21.7 | 40.9 | 51.7 |
| 290 | 21 | 39.4 | 49.4 |
| 300 | 20.3 | 38 | 47.2 |
| 310 | 19.6 | 36.6 | 45.2 |
| 320 | 19 | 35.3 | 43.4 |
| 330 | 18.4 | 34.1 | 41.6 |
| 340 | 17.9 | 32.8 | 40 |
| 350 | 17.4 | 31.6 | 38.5 |
| 360 | 16.9 | 30.4 | 37.1 |
| 370 | 16.4 | 29.3 | 35.8 |
| 380 | 16 | 28.2 | 34.6 |
| 390 | 15.6 | 27.1 | 33.4 |
| 400 | 15.2 | 26.1 | 32.3 |
Graphs of the dependence of specific capacity on the forming voltage of high-voltage anode foil
Specific capacitance, μF/dm2
Nominal voltage, V
Specific capacitance of high-voltage molded foils as a function of molding voltage
| Uf, V | Nominal individual capacity, μF/dm2 | ||
|---|---|---|---|
| АВ1/0,080-4 АВ1/0,100-4 | АВ2/0,080-4 АВ2/0,100-4 | АВ3/0,080-4 АВ3/0,100-4 |
|
| 200 | 40.2 | 61 | 88.6 |
| 210 | 38.6 | 58.6 | 83.1 |
| 220 | 37 | 56.3 | 78.2 |
| 230 | 35.4 | 54.1 | 73.7 |
| 240 | 34 | 52 | 69.7 |
| 250 | 32.6 | 50 | 66 |
| 260 | 31.2 | 48.2 | 62.7 |
| 270 | 29.9 | 46.4 | 59.6 |
| 280 | 28.7 | 44.7 | 56.9 |
| 290 | 27.5 | 43.1 | 54.3 |
| 300 | 26.4 | 41.5 | 52 |
| 310 | 25.3 | 40 | 49.8 |
| 320 | 24.2 | 38.6 | 47.8 |
| 330 | 23.2 | 37.3 | 45.9 |
| 340 | 22.3 | 36 | 44.2 |
| 350 | 21.3 | 34.8 | 42.5 |
| 360 | 20.5 | 33.7 | 41 |
| 370 | 19.6 | 32.5 | 39.5 |
| 380 | 18.8 | 31.5 | 38 |
| 390 | 18 | 30.5 | 36.7 |
| 400 | 17.3 | 29.5 | 35.4 |
| 410 | 16.6 | 28.5 | 34.1 |
| 420 | 15.9 | 27.6 | 32.9 |
| 430 | 15.2 | 26.7 | 31.7 |
| 440 | 14.6 | 25.9 | 30.6 |
| 450 | 14 | 25 | 29.5 |
| 460 | 13.4 | 24.2 | 28.4 |
| 470 | 12.9 | 23.4 | 27.4 |
| 480 | 12.3 | 22.7 | 26.4 |
| 490 | 11.8 | 21.9 | 25.5 |
| 500 | 11.3 | 21.2 | 24.6 |
| 510 | 10.9 | 20.5 | 23.8 |
| 520 | 10.4 | 19.8 | 23 |
| 530 | 9.98 | 19.1 | 22.2 |
| 540 | 9.57 | 18.4 | 21.5 |
| 550 | 9.17 | 17.8 | 20.9 |
| 560 | 8.79 | 17.1 | 20.3 |
| 570 | 8.43 | 16.5 | 19.7 |
| 580 | 8.08 | 15.9 | 19.1 |
| 590 | 7.75 | 15.3 | 18.6 |
| 600 | 7.43 | 14.7 | 18.1 |
| 610 | 7.12 | 14.1 | 17.6 |
| 620 | 6.82 | 13.5 | 17.1 |
| 630 | 6.54 | 12.9 | 16.6 |
Graphs of the dependence of specific capacity on the forming voltage of high-voltage anode foil
Specific capacitance, μF/dm2
Nominal voltage, V
Specific capacitance of high-voltage molded foils as a function of molding voltage
| Uf, V | Nominal individual capacity, μF/dm2 | ||
|---|---|---|---|
| АВ4/0,080-4 АВ4/0,100-4 | АВ5/0,080-4 АВ5/0,100-4 | АВ6/0,080-4 АВ6/0,100-4 АВ6/0,110-4 |
|
| 200 | 101.3 | 122 | 131.4 |
| 210 | 95.2 | 114.8 | 124.2 |
| 220 | 89.6 | 108.1 | 117.6 |
| 230 | 84.6 | 102.1 | 111.7 |
| 240 | 80 | 96.6 | 106.3 |
| 250 | 75.9 | 91.5 | 101.4 |
| 260 | 72.1 | 86.9 | 96.9 |
| 270 | 68.7 | 82.7 | 92.7 |
| 280 | 65.5 | 78.8 | 88.9 |
| 290 | 62.7 | 75.3 | 85.3 |
| 300 | 60 | 72 | 82 |
| 310 | 57.5 | 69 | 79 |
| 320 | 55.3 | 66.2 | 76.1 |
| 330 | 53.1 | 63.6 | 73.4 |
| 340 | 51.1 | 61.2 | 70.9 |
| 350 | 49.2 | 58.9 | 68.6 |
| 360 | 47.4 | 56.8 | 66.4 |
| 370 | 45.7 | 54.9 | 64.3 |
| 380 | 44.1 | 53 | 62.3 |
| 390 | 42.6 | 51.3 | 60.5 |
| 400 | 41.1 | 49.6 | 58.7 |
| 410 | 39.6 | 48 | 57.1 |
| 420 | 38.3 | 46.6 | 55.5 |
| 430 | 36.9 | 45.1 | 54 |
| 440 | 35.6 | 43.8 | 52.6 |
| 450 | 34.4 | 42.5 | 51.2 |
| 460 | 33.2 | 41.3 | 49.9 |
| 470 | 32.1 | 40.1 | 48.7 |
| 480 | 31 | 39 | 47.5 |
| 490 | 29.9 | 37.9 | 46.4 |
| 500 | 28.9 | 36.9 | 45.3 |
| 510 | 28 | 35.9 | 44.3 |
| 520 | 27.1 | 35 | 43.3 |
| 530 | 26.3 | 34.1 | 42.3 |
| 540 | 25.5 | 33.3 | 41.4 |
| 550 | 24.7 | 32.6 | 40.5 |
| 560 | 24 | 31.8 | 39.7 |
| 570 | 23.4 | 31.2 | 38.9 |
| 580 | 22.7 | 30.6 | 38.1 |
| 590 | 22.1 | 30 | 37.4 |
| 600 | 21.5 | 29.5 | 36.6 |
| 610 | 20.9 | 29 | 36 |
| 620 | 20.3 | 28.5 | 35.3 |
| 630 | 19.7 | 28.1 | 34.6 |
Graphs of the dependence of specific capacity on the forming voltage of high-voltage anode foil
Specific capacitance, μF/dm2
Nominal voltage, V
Specific capacitance of high-voltage molded foils as a function of molding voltage
| Uf, V | Nominal individual capacity, μF/dm2 | |
|---|---|---|
| АВ7/0,100-4 АВ7/0,110-4 | АВ8/0,110-4 | |
| 200 | 174.1 | 199.7 |
| 210 | 163.9 | 188.1 |
| 220 | 154.8 | 177.7 |
| 230 | 146.5 | 168.2 |
| 240 | 139 | 159.7 |
| 250 | 132.2 | 151.9 |
| 260 | 125.9 | 144.7 |
| 270 | 120.2 | 138.2 |
| 280 | 114.9 | 132.1 |
| 290 | 110 | 126.6 |
| 300 | 105.5 | 121.4 |
| 310 | 101.3 | 116.6 |
| 320 | 97.4 | 112.1 |
| 330 | 93.8 | 108 |
| 340 | 90.4 | 104.1 |
| 350 | 87.2 | 100.5 |
| 360 | 84.2 | 97 |
| 370 | 81.4 | 93.8 |
| 380 | 78.8 | 90.8 |
| 390 | 76.3 | 88 |
| 400 | 74 | 85.3 |
| 410 | 71.7 | 82.7 |
| 420 | 69.6 | 80.3 |
| 430 | 67.6 | 78 |
| 440 | 65.7 | 75.8 |
| 450 | 63.9 | 73.8 |
| 460 | 62.2 | 71.8 |
| 470 | 60.6 | 69.9 |
| 480 | 59 | 68.2 |
| 490 | 57.6 | 66.5 |
| 500 | 56.1 | 64.8 |
| 510 | 54.8 | 63.3 |
| 520 | 53.5 | 61.8 |
| 530 | 52.2 | 60.3 |
| 540 | 51 | 59 |
| 550 | 49.9 | 57.7 |
| 560 | 48.8 | 56.4 |
| 570 | 47.7 | 55.2 |
| 580 | 46.7 | 54 |
| 590 | 45.8 | 52.9 |
| 600 | 44.8 | 51.8 |
| 610 | 43.9 | 50.8 |
| 620 | 43 | 49.8 |
| 630 | 42.2 | 48.8 |
Graphs of the dependence of specific capacity on the forming voltage of high-voltage anode foil
Specific capacitance, μF/dm2
Nominal voltage, V
Specific capacitance of high-voltage molded foils as a function of molding voltage
| Uf, V | Nominal individual capacity, μF/dm2 | ||
|---|---|---|---|
| АВ8/0,105-1 АВ8/0,110-1 | АВ9/0,110-1 АВ9/0,120-1 | АВ10/0,125-1 | |
| 200 | 202 | 235 | 276 |
| 210 | 192 | 223 | 261 |
| 220 | 183 | 212 | 248 |
| 230 | 174 | 202 | 235 |
| 240 | 166 | 192 | 223 |
| 250 | 158 | 184 | 212 |
| 260 | 151 | 175 | 202 |
| 270 | 144 | 168 | 193 |
| 280 | 138 | 160 | 184 |
| 290 | 132 | 156 | 176 |
| 300 | 127 | 147 | 168 |
| 310 | 122 | 141 | 161 |
| 320 | 117 | 136 | 155 |
| 330 | 113 | 131 | 149 |
| 340 | 108 | 126 | 143 |
| 350 | 104 | 121 | 138 |
| 360 | 101 | 117 | 133 |
| 370 | 97.3 | 113 | 129 |
| 380 | 94 | 109 | 124 |
| 390 | 91 | 106 | 120 |
| 400 | 88.1 | 102 | 117 |
| 410 | 85.3 | 99.1 | 113 |
| 420 | 82.7 | 96 | 109 |
| 430 | 80.2 | 93.1 | 106 |
| 440 | 77.8 | 90.4 | 103 |
| 450 | 75.5 | 87.7 | 100 |
| 460 | 73.4 | 85.2 | 97.2 |
| 470 | 71.3 | 82.8 | 94.4 |
| 480 | 69.3 | 80.5 | 91.8 |
| 490 | 67.4 | 78.2 | 89.2 |
| 500 | 65.5 | 76.1 | 86.7 |
| 510 | 63.7 | 74 | 84.3 |
| 520 | 62 | 72 | 82 |
| 530 | 60.3 | 70.1 | 79.8 |
| 540 | 58.7 | 68.2 | 77.6 |
| 550 | 57.2 | 66.4 | 45.5 |
| 560 | 55.7 | 64.6 | 73.4 |
| 570 | 54.2 | 62.9 | 71.4 |
| 580 | 52.8 | 61.3 | 69.5 |
| 590 | 51.4 | 59.7 | 67.7 |
| 600 | 50.1 | 58.2 | 65.9 |
| 610 | 48.8 | 56.7 | 64.1 |
| 620 | 47.6 | 55.3 | 62.5 |
| 630 | 46.4 | 53.9 | 60.9 |
| 640 | 45.3 | 52.6 | 59.4 |
| 650 | 44.2 | 51.3 | 57.9 |
| 660 | 43.1 | 50.1 | 56.5 |
| 670 | 42.1 | 48.9 | 55.2 |
| 680 | 41.1 | 47.8 | 54 |
| 690 | 40.2 | 46.7 | 52.8 |
| 700 | 39.3 | 45.7 | 51.7 |
| 710 | 38.5 | 44.7 | 50.6 |
| 720 | 37.7 | 43.7 | 49.6 |
| 730 | 36.9 | 42.8 | 48.7 |
| 740 | 36.1 | 42 | 47.8 |
| 750 | 35.4 | 41.2 | 46.9 |
| 760 | 34.8 | 40.4 | 46.1 |
| 770 | 34.1 | 39.6 | 45.3 |
| 780 | 33.5 | 38.9 | 44.5 |
| 790 | 32.8 | 38.1 | 43.7 |
| 800 | 32.2 | 37.4 | 42.9 |
| 810 | 31.6 | 36.7 | 42 |
| 820 | 31 | 35.9 | 41.2 |
| 830 | 30.3 | 35.2 | 40.2 |
| 840 | 29.6 | 34.4 | 39.2 |
| 850 | 28.9 | 33.6 | 38 |
Graphs of the dependence of specific capacity on the forming voltage of high-voltage anode foil
Specific capacitance, μF/dm2
Nominal voltage, V
Mechanical properties of molded high-voltage anode foils
| Foil model | Thickness, mm | Parameter meaning | Nominal weight of foil 1 m2, g (±10%) | ||
|---|---|---|---|---|---|
| Tensile strength, kgf/10 mm, not less than | Number of folds, not less than (r=(0.5±0.05)mm) | Number of folds, not less than (r=(3.5±0.35)mm) |
|||
| АВ1/0,080-3 | 0.08 | 1.8 | 12 | ‒ | 217.9 |
| АВ1/0,080-4 | |||||
| АВ2/0,080-3 | 1.8 | 12 | ‒ | 204 | |
| АВ2/0,080-4 | |||||
| АВ3/0,080-3 | 1.7 | 12 | ‒ | 197.9 | |
| АВ3/0,080-4 | |||||
| АВ4/0,080-4 | 1.6 | 12 | ‒ | 189.2 | |
| АВ5/0,080-4 | 1.5 | 5 | ‒ | 177.7 | |
| АВ6/0,080-4 | 1.5 | 3 | ‒ | 169.5 | |
| АВ1/0,100-3 | 0.1 | 2.3 | 12 | ‒ | 258.4 |
| АВ1/0,100-4 | |||||
| АВ2/0,100-3 | 2.3 | 12 | ‒ | 244.5 | |
| АВ2/0,100-4 | |||||
| АВ3/0,100-3 | 2.2 | 12 | ‒ | 238.4 | |
| АВ3/0,100-4 | |||||
| АВ4/0,100-4 | 2.1 | 12 | ‒ | 229.7 | |
| АВ5/0,100-4 | 2 | 5 | ‒ | 218.2 | |
| АВ6/0,100-4 | 2 | 3 | ‒ | 210 | |
| АВ7/0,100-4 | 1.8 | 1 | ‒ | 201.4 | |
| АВ8/0,105-1 | 0.105 | 2 | 3 | 30 | 266.3 |
| АВ6/0,110-4 | 0.11 | 3 | 3 | 50 | 212.8 |
| АВ7/0,110-4 | 3 | 1 | 60 | 244.6 | |
| АВ8/0,110-1 | 2.4 | 5 | 50 | 278 | |
| АВ8/0,110-4 | 3 | 1 | 50 | 238.1 | |
| АВ9/0,110-1 | 2.2 | 3 | 40 | 267.3 | |
| АВ9/0,120-1 | 0.12 | 2.4 | 10 | 60 | 296.1 |
| АВ10/0,125-1 | 0.125 | 2.2 | 3 | 40 | 304.7 |
Electrical parameters of molded high voltage foil
| Controlled parameters | Forming stress, V | |
|---|---|---|
| 200 ≤ Uf ≤ 850 V | Uf ≥ 600 * | |
| Maximum voltage UM, V | ≥ Uf | |
| Time to reach 0.95 Uf, s | ≤ (Uf/2+30) | – |
| Leakage current, mA/dm2 | ≤ 15 | ≤ 10 |
| Time to reach Uf after hydration 30 minutes, s | ≤ 250 | – |
| Time to reach Uf after hydration 2 hours, s | ≤ 120 | – |
| Time to reach Uf after hydration 4 hours, s | ≤ 60 | – |
| * For foil leads | ||