Supercapacitors modules MIK buy

Main parameters

Name	Value
Rated voltage, V	5…30
Rated capacitance, F	4.16…25
Capacitance tolerance (25°C, 50 Hz), %	+50…-20; ±20
Maximum operating temperature Tenv, °C	+65
Minimal operating temperature Tenv, °C	Type 1: -50 Type 2: -60

General view drawing

Figure 1

Figure 2

(also see fig. 1)

Figure 3

(also see fig. 1)

View Z (2:1)

Overall dimensions and mass of supercapacitor modules MIK

Name	Type¹	Version²	Dimensions, mm						Mass, g	Figure
Name	Type¹	Version²	L±2	W±2	H±2	h₁±2	h₂±3	A±3	Mass, g	Figure
Module 5V х 7.5F	1	1	45	31	60	-	100	-	75	3
Module 5V х 25F	1	2	52	32	75.5	9	-	37	160	1
Module 7.5V х 5F	1	1	45	31	85	-	100	-	85	3
Module 7.5V х 16.66F	1	2	52	32	101.5	9	-	37	235	1
Module 10V х 12.5F	1	2	52	32	128	9	-	37	290	1
Module 12.5V х 10F	1	2	52	32	145	9	-	37	350	1
Module 15V х 8.33F	1	2	52	32	181	9	-	37	500	1
Module 20V х 6.25F	1	2	59	52	128	9	-	38	580	2
Module 25V х 5F	1	2	59	52	154	9	-	38	700	2
Module 30V х 4.16F	1	2	59	52	181	9	-	38	880	2
Module 5V х 7.5F	2	1	45	31	60	-	100	-	75	3
Module 5V х 25F	2	2	52	32	75.5	9	-	37	160	1
Module 7.5V х 5F	2	1	45	31	85	-	100	-	85	3
Module 7.5V х 16.66F	2	2	52	32	101.5	9	-	37	235	1
Модуль 10V х 12.5F	2	2	52	32	128	9	-	37	290	1
Module 12.5V х 10F	2	2	52	32	145	9	-	37	350	1
Module 15V х 8.33F	2	2	52	32	181	9	-	37	500	1
Module 20V х 6.25F	2	2	59	52	128	9	-	38	580	2
Module 25V х 5F	2	2	59	52	154	9	-	38	700	2
Module 30V х 4.16F	2	2	59	52	181	9	-	38	880	2

Note 1

Type-1 with lower ESR and leakage current, operating temperature range from –50°C to +65°C (MIK-1-1, MIK-1-2);

Type-2 with extended operating temperature range from -60°C to +65°C (MIK-2-1, MIK-2-2).

Note 2

Version 1 are sealed modules in non-insulated metal square case with unidirectional polar wire leads. Modules are designed for internal wiring with higher humidity resistance of 98% at temperature 25°С and 35°С.

Version 2 are sealed modules in non-insulated metal square case with unidirectional polar wire leads (leaves acc. To GOST 22376). Modules are designed for internal wiring with higher humidity resistance of 98% at temperature 25°С and 35°С.

Electrical parameters for ionistor modules MIK
Type-1

Rated voltage, V	Rated capacitance, F	Leakage current, µA, (72 hours) T=(25±1)°C	ESRDC, MOhm T=(25±1)°C
5	7.5	40	82
5	25	160	32
7.5	5	40	123
7.5	16.66	160	48
10	12.5	160	64
12.5	10	160	80
15	8.33	160	96
20	6.25	160	128
25	5	160	160
30	4.16	160	192

Electrical parameters for ionistor modules MIK
Type-2

Rated voltage, V	Rated capacitance, F	Leakage current, µA, (72 hours) T=(25±1)°C	ESRDC, MOhm T=(25±1)°C
5	7.5	60	170
5	25	240	64
7.5	5	60	255
7.5	16.66	240	96
10	12.5	240	128
12.5	10	240	160
15	8.33	240	192
20	6.25	240	256
25	5	240	320
30	4.16	240	384

Capacitors reliability

Reliability Operation modes	t_λ, hours	t_λ, cycles	λ, 1/hour, max
Maximum-permissible mode (UR, Tenv=65 °С)	1 500		5x10^-4
Maximum-permissible mode (charge to UR, discharge to ½UR, Tenv=65°С)		30 000	5x10^-5
Typical operating mode (UR, Tenv=25°С)	90 000		2x10^-5
Typical operating mode (charge to UR, discharge to ½UR, Tenv=25°С)		500 000	2x10^-7

Gamma-rated time of capacitor storageability Tcy at y=95%, 25 years

Example of reference designation

Module MIK-1-2 – 20V – 6.5F – M EVAYA.673623.025 ТУ

Module MIK-2-1 – 5V – 7.5F – S – B EVAYA.673623.025 ТУ

“M” – capacitance tolerance code (±20%);

“S” – capacitance tolerance code (+50…-20)%;

“B” – module for internal wiring with higher humidity resistance of 98% at temperature 35°С , without “B”– module for internal wiring with higher humidity resistance of 98% at temperature 25°С;